3, 6 or 9vdc

12 or 24vdc

With remote infra red sensors

6 or 9vdc

With remote infra red sensors

12 or 24vdc

For tap applications

With built-in infra red sensors

6 or 9vdc

For urinal applications

With built-in infra red sensors

6 or 9vdc

3, 6 or 9vdc

12 or 24vdc

With remote infra red sensors

6 or 9vdc

With remote infra red sensors

12 or 24vdc

6 or 9vdc

12 or 24vdc, 12vac

Plastic body that converts a cartridge valve to a solenoid configuration.

For use with all cartridge valves with either remote or built in infra red sensors.

Provides moisture protection for 6v & 9v batteries when used with bi-stable valves.

Also known as latching valves.

Require a positve pulse to open, then a negative pulse to close.

Only uses power when being switched.

Available in 3, 6 or 9vdc.

Ideal for use with batteries.

Require a voltage to open the valve.

Valve closes when the voltage ceases.

After the initial opeing the holding voltage can be reduced.

Available in 12 or 24vdc.

Ideal for use with transformers.

Inlet and outlet on the bottom of the valve.

Inlet and outlet at opposite ends of the valve.

As per the standard valves but with the solenoid moved to one side to accomodate the battery.

7mm orifice

6v or 9vdc

Bi-stable valve mounted into a 'standard' body. 11mm orifice enables a higher flow rate.

Direct acting

6 or 9vdc

0,5 or 0.8mm orifice

Direct acting

12 or 24vdc, 12 vac

0.5mm orifice